Home › Drawing notes › 3D printing (additive manufacturing)
Free drawing notes library
5 copy-ready notes for 3d printing (additive manufacturing), in English and Spanish. Copy a note, replace the [bracketed] example values, and check the "Watch for" line before you release the drawing.
Values in [brackets] are examples; replace them with your own. Notes marked Verify values rely on common practice; confirm them with your supplier or design engineer. These notes are examples, not an engineering approval of your drawing.
AM-01 Process and materialAM-02 Build orientationAM-03 TolerancesAM-04 Supports and finishAM-05 Metal post-processing
MANUFACTURE BY [MJF / SLS] IN [PA12]. METAL: [LASER POWDER BED FUSION] IN [17-4PH].FABRICAR POR [MJF / SLS] EN [PA12]. METAL: [FUSIÓN LÁSER EN LECHO DE POLVO] EN [17-4PH].BUILD ORIENTATION AT SUPPLIER'S OPTION UNLESS SHOWN.ORIENTACIÓN DE IMPRESIÓN A ELECCIÓN DEL PROVEEDOR A MENOS QUE SE INDIQUE.UNTOLERANCED DIMENSIONS ±[0.3]% OR ±[0.3] MM, WHICHEVER IS GREATER.DIMENSIONES SIN TOLERANCIA ±[0.3]% O ±[0.3] MM, LO QUE SEA MAYOR.REMOVE ALL SUPPORT MATERIAL AND LOOSE POWDER. SURFACES MARKED [△33]: [BEAD BLAST / MACHINE].RETIRAR TODO EL SOPORTE Y EL POLVO SUELTO. SUPERFICIES MARCADAS [△33]: [MICROESFERA / MAQUINAR].STRESS RELIEVE BEFORE REMOVAL FROM BUILD PLATE. [HIP PER ___] IF REQUIRED.RELEVAR ESFUERZOS ANTES DE RETIRAR DE LA PLACA DE IMPRESIÓN. [HIP SEGÚN ___] SI SE REQUIERE.Fred checks your PDF drawings against ASME Y14.5 and sends a findings report: every correction located by sheet and zone, with what to change and why. From $29 a sheet. NDA first.