Home › Drawing notes › Assemblies
Free drawing notes library
7 copy-ready notes for assemblies, in English and Spanish. Copy a note, replace the [bracketed] example values, and check the "Watch for" line before you release the drawing.
Values in [brackets] are examples; replace them with your own. Notes marked Verify values rely on common practice; confirm them with your supplier or design engineer. These notes are examples, not an engineering approval of your drawing.
ASM-01 TorqueASM-02 ThreadlockerASM-03 LubricationASM-04 Free rotationASM-05 Play or clearanceASM-06 ProtectionASM-07 Identification
TORQUE [1/4-20] FASTENERS TO [75–85] IN-LB, [DRY / LUBRICATED].APRETAR LOS TORNILLOS [1/4-20] A [75–85] LB-PULG, [EN SECO / LUBRICADOS].APPLY [LOCTITE 242] (MEDIUM STRENGTH) TO THREADS OF ITEMS [7, 8].APLICAR [LOCTITE 242] (RESISTENCIA MEDIA) A LAS ROSCAS DE LOS ELEMENTOS [7, 8].LUBRICATE [ITEM 4 BORE] WITH [GREASE, P/N ___].LUBRICAR [BARRENO DEL ELEMENTO 4] CON [GRASA, N/P ___].[ITEM 3] SHALL ROTATE FREELY: BREAKAWAY TORQUE [2] IN-LB MAX.[ELEMENTO 3] DEBE GIRAR LIBREMENTE: PAR DE ARRANQUE [2] LB-PULG MÁX.END PLAY [.002–.008] AFTER ASSEMBLY.JUEGO AXIAL [.002–.008] DESPUÉS DEL ENSAMBLE.PROTECT ASSEMBLY FROM CORROSION AND DAMAGE DURING SHIPPING AND STORAGE. CAP ALL OPEN PORTS.PROTEGER EL ENSAMBLE CONTRA CORROSIÓN Y DAÑOS DURANTE EMBARQUE Y ALMACENAJE. TAPAR TODOS LOS PUERTOS ABIERTOS.APPLY LABEL [P/N ___] WITH ASSEMBLY NUMBER, REVISION AND SERIAL NUMBER AT [△31].COLOCAR ETIQUETA [N/P ___] CON NÚMERO DE ENSAMBLE, REVISIÓN Y NÚMERO DE SERIE EN [△31].Fred checks your PDF drawings against ASME Y14.5 and sends a findings report: every correction located by sheet and zone, with what to change and why. From $29 a sheet. NDA first.