Home › Drawing notes › Vacuum forming / thermoforming
Free drawing notes library
5 copy-ready notes for vacuum forming / thermoforming, in English and Spanish. Copy a note, replace the [bracketed] example values, and check the "Watch for" line before you release the drawing.
Values in [brackets] are examples; replace them with your own. Notes marked Verify values rely on common practice; confirm them with your supplier or design engineer. These notes are examples, not an engineering approval of your drawing.
VAC-01 MaterialVAC-02 Controlled sideVAC-03 Tolerances by sizeVAC-04 TrimVAC-05 Molded graphics
MATERIAL: [ABS SHEET, .125 STARTING THICKNESS], COLOR [BLACK], [TEXTURE ___ ON SHEET].MATERIAL: [LÁMINA DE ABS, ESPESOR INICIAL .125], COLOR [NEGRO], [TEXTURA ___ EN LÁMINA].DIMENSIONS APPLY TO THE [TOOL] SIDE. MINIMUM WALL AFTER FORMING [.040].LAS DIMENSIONES APLICAN DEL LADO DEL [MOLDE]. PARED MÍNIMA DESPUÉS DEL FORMADO [.040].FORMED FEATURES: ±[0.05] MM UP TO 12 MM, ±[0.10] MM 12–25 MM, PLUS ±[0.02] MM PER ADDITIONAL 25 MM.CARACTERÍSTICAS FORMADAS: ±[0.05] MM HASTA 12 MM, ±[0.10] MM DE 12 A 25 MM, MÁS ±[0.02] MM POR CADA 25 MM ADICIONALES.TRIM EDGES ±[.030]. TRIMMED EDGES FREE OF CRACKS AND WHITENING.BORDES RECORTADOS ±[.030], SIN GRIETAS NI BLANQUEAMIENTO.PART NUMBER, REVISION, DATE AND RECYCLING CODE RAISED [0.25] MM, [2.0] MM TALL, AT [△30].NÚMERO DE PARTE, REVISIÓN, FECHA Y CÓDIGO DE RECICLAJE EN RELIEVE DE [0.25] MM, [2.0] MM DE ALTURA, EN [△30].Fred checks your PDF drawings against ASME Y14.5 and sends a findings report: every correction located by sheet and zone, with what to change and why. From $29 a sheet. NDA first.